Atlas Copco HB 10000 Moil Tool

Piramide Atlas Copco HB 10000
Power, Precision, and Durability: The Atlas Copco HB 10000 Moil Tool – Now Available Exclusively from MERIT

When it comes to heavy-duty rock excavation and demolition in the most demanding environments, only the toughest tools can deliver. At MERIT, we’re proud to offer the Atlas Copco HB 10000 Moil Tool – a legendary performer in the world of hydraulic breakers, engineered for maximum impact, unmatched durability, and superior efficiency. If you're looking for a moil point that can handle the harshest rock conditions while minimizing downtime and maintenance, the HB 10000 is your ultimate solution – and MERIT is your trusted source.

Built for the Toughest Jobs
The Atlas Copco HB 10000 is designed specifically for high-capacity hydraulic breakers used in mining, quarrying, tunneling, and large-scale construction. With a massive 75.6-inch length and a robust 9.4-inch diameter, this moil tool delivers deep penetration and exceptional striking force. Weighing in at a solid 1,278 lbs, the HB 10000 is engineered to withstand repeated high-impact blows without cracking, bending, or premature wear.
This isn’t just a tool – it’s a productivity multiplier. Whether you’re breaking through hard granite, basalt, or reinforced concrete, the HB 10000 maintains its edge and integrity, ensuring consistent performance across long shifts and tough terrain.
Why the HB 10000 Stands Out
- Optimized Geometry: The tapered design and hardened tip allow for superior penetration, reducing the number of blows needed to fracture rock. This means faster cycle times and lower fuel consumption.
- Premium Alloy Steel Construction: Forged from high-grade, heat-treated alloy steel, the HB 10000 resists chipping, mushrooming, and deformation – even under extreme loads.
- Precision Fit: Designed specifically for Atlas Copco HB 10000 series breakers, ensuring perfect alignment and maximum energy transfer from the piston to the tool.
- Extended Service Life: With proper maintenance and rotation, the HB 10000 offers one of the longest service lives in its class – reducing replacement frequency and lowering your total cost of ownership.
Engineered for Maximum Efficiency

Every inch of the Atlas Copco HB 10000 tool is designed with performance in mind. Its 75.6-inch length allows deeper reach into drill holes and trenches, minimizing repositioning and maximizing productivity. The 9.4-inch diameter provides a large striking surface that distributes force evenly, reducing stress on the breaker housing and prolonging the life of internal components.

And because it weighs 1,278 lbs, the HB 10000 carries serious momentum – translating into more effective energy transfer with every blow. Less energy lost means faster rock fracturing, reduced cycle times, and higher output per shift.
Why Buy from MERIT?
At MERIT, we don’t just sell tools – we deliver performance, reliability, and peace of mind. When you choose the Atlas Copco HB 10000 Moil Tool through MERIT, you’re getting more than just a product. You’re gaining a partner committed to your operational success.
Here’s why contractors, miners, and demolition experts trust MERIT:
✅ Authentic, OEM-Quality Tools
We supply only genuine, factory-engineered moil points that meet Atlas Copco’s exact specifications. No knock-offs. No compromises. Just the durability and precision you expect from a global leader in rock excavation.
✅ In-Stock & Ready to Ship
Downtime is costly. That’s why MERIT maintains strategic inventory of the HB 10000 and other high-demand tools. Order today, and we’ll get it to your site fast – so you can get back to work.
✅ Expert Technical Support
Our team of application specialists understands your challenges. Whether you need help selecting the right tool, optimizing breaker settings, or extending tool life, we’re here to support you – before, during, and after the sale.
✅ Nationwide Delivery & Logistics Support
No matter where your operation is based, MERIT delivers. With reliable freight partners and flexible shipping options, we ensure your tools arrive on time and ready for action.
Real-World Results
Our customers report:
- Up to 30% longer service life compared to generic alternatives
- 20% reduction in breaker downtime due to fewer tool changes and failures
- Faster project completion thanks to consistent penetration and performance
One mining contractor in Nevada recently switched to MERIT-supplied HB 10000 moil tools and saw their daily rock-breaking output increase by 18% – all while cutting tool replacement costs by nearly a quarter.
Don’t Settle for Less
Generic moil points may seem cheaper upfront, but they cost more in the long run. Poor fit, rapid wear, and frequent breakage lead to wasted time, increased labor, and higher operating costs. The Atlas Copco HB 10000, sourced through MERIT, is an investment in uptime, efficiency, and profitability.
Whether you're running a single breaker or managing a full fleet, the HB 10000 delivers the performance you demand and the reliability you can count on – shift after shift, day after day.
Act Now – Boost Your Productivity Today
Don’t let inferior tools slow you down. Upgrade to the Atlas Copco HB 10000 Moil Tool from MERIT and experience the difference that genuine engineering excellence makes.
📞 Call us today at +90 533 523 97 42
🌐 Visit our website at www.meritautomotive.com
📧 Email our sales team at info@meritautomotive.com
Ask about bulk pricing, fleet discounts, and our tool rotation and maintenance programs designed to maximize your ROI.

Atlas Copco HB 10000 Moil Tool – Specifications (Imperial)

- Length: 75.6 inches
- Diameter: 9.4 inches
- Weight: 1,278 lbs
- Compatibility: Atlas Copco HB 10000 Hydraulic Breakers
- Material: High-strength, heat-treated alloy steel
MERIT – Your Partner in Performance. Your Source for the Toughest Tools in the Industry.
When the job demands the best, trust MERIT to deliver.
Get the HB 10000. Get the job done.
Disclaimer
The information provided in this communication, including but not limited to product descriptions, specifications, images, pricing, and technical data, is for general informational purposes only. While MERIT strives to ensure the accuracy and reliability of all content, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability, or availability of the information, products, or services featured.

All specifications, such as length, diameter, weight, compatibility, and performance claims, are based on manufacturer data (Atlas Copco) and industry-standard testing conditions. Actual performance may vary depending on operating conditions, equipment maintenance, application methods, and environmental factors. Product weights and dimensions are approximate and subject to manufacturing tolerances.

MERIT is an independent supplier and is not affiliated with, authorized by, or endorsed by Atlas Copco AB or its subsidiaries. The mention of “Atlas Copco” and product model numbers (e.g., HB 10000) is for identification and compatibility purposes only. MERIT does not claim ownership of any trademarks or intellectual property belonging to Atlas Copco or other third parties.
Use of any tool or attachment should be performed in accordance with applicable safety standards, equipment manuals, and local regulations. MERIT is not liable for any damage, injury, or loss resulting from improper use, installation, or maintenance of the products we supply.
Pricing, availability, and promotions are subject to change without notice. Product images may differ slightly from actual items. For the most current product details and warranty information, please contact MERIT directly.
By using our products or relying on the information provided, you acknowledge and agree to this disclaimer in full. If you do not agree, please do not use our services or purchase our products.
MERIT – Performance You Can Trust. Responsibility You Can Count On. https://meritautomotive.com/product/atlas-copco-hb-10000-moil-tool/